Words that last
Labels and reviews use words that sound good and say little. These are the ones that do tell you something: what a thing is made of, how it is put together, and how to keep it going. Each has a line on what to look for.
Materials
- Full-grain leather
-
The outer layer of the hide with its natural surface left on. It is the strongest leather, wears in rather than out, and darkens with use.
Look for: Visible pores and small marks. "Genuine leather" is a lower grade, often split and coated.
- Merino wool
-
Fine wool from merino sheep. It stays warm when damp, resists smells so it needs washing less, and can be darned when it wears through.
Look for: A high wool percentage. Thin blends with a lot of nylon pill and wear faster on the surface.
- Waxed cotton
-
Tightly woven cotton soaked in wax so rain runs off. The wax wears thin over the years and is put back with a tin of dressing, so the jacket can last decades.
Look for: A maker that sells re-proofing wax and offers repairs.
- Cast iron
-
Iron poured into a mould. Heavy, slow to heat and slow to cool, and almost impossible to break by cooking. Rust is a surface problem, not the end.
Look for: One solid piece, no rivets, no coating that can wear off.
- Carbon steel
-
Iron with a little carbon, rolled into sheet. For pans, it heats faster than cast iron and is lighter; for knives, it takes a very sharp edge but rusts if left wet.
Look for: A plain grey pan with no non-stick layer, or a knife sold with a note about keeping it dry.
- Stainless steel (18/10)
-
Steel with chromium and nickel so it does not rust. 18/10 means 18% chromium and 10% nickel, the usual grade for good pans and cutlery.
Look for: A thick base, ideally with aluminium or copper sealed inside, so heat spreads evenly.
- Enamel
-
A layer of glass fused onto metal. It does not need seasoning and does not react with acid, but it can chip if dropped or heated empty.
Look for: A long guarantee from the maker; good enamelled cast iron often has one.
- Borosilicate and tempered glass
-
Borosilicate copes with sudden heat; tempered glass is toughened so it is far harder to break and, if it does, breaks into small blunt pieces.
Look for: Glass sold for daily use in cafés and canteens, which is a good test of toughness.
- Ripstop
-
Fabric woven with a thicker thread every few millimetres, so a small tear stops at the grid instead of running.
Look for: A small square pattern you can see in the weave.
- Recycled down and fill power
-
Down is the soft under-feathers of ducks and geese. Fill power measures how much it lofts: higher numbers are warmer for their weight. Down keeps its loft for many years if kept clean and dry.
Look for: A fill power of 600 or more and a maker that repairs torn baffles.
- Selvedge denim
-
Denim woven on older, narrower shuttle looms, which leave a neat, self-finished edge that will not fray. Often heavier and more tightly woven than ordinary denim.
Look for: A coloured line along the inside of the outer seam when the cuff is turned up. It is a sign of how the cloth was woven, not a promise on its own: check the weight and the stitching too.
- Low self-discharge (LSD) NiMH
-
A kind of rechargeable AA and AAA battery that keeps most of its charge for many months on the shelf, so it works in things you use now and then, not only in things you use every day.
Look for: Cells sold “ready to use” or pre-charged, which only makes sense if they hold their charge.
How it is made
- Goodyear welt
-
A strip of leather stitched around the edge of a shoe that joins the upper to the sole. The sole can be cut off and a new one stitched on, many times.
Look for: Stitching visible around the top edge of the sole. Glued (cemented) soles usually cannot be replaced.
- Full tang
-
A knife whose steel runs the whole length of the handle. Stronger and better balanced than a blade pushed into a handle.
Look for: Steel visible along the spine of the handle, or a maker who says so.
- Bar tacks
-
Short, dense rows of stitches at the points that take the most strain: pocket corners, belt loops, the bottom of a zip.
Look for: Small, tight blocks of stitching at stress points. Missing tacks are where clothes tear first.
- Flat-felled seam
-
A seam folded over and stitched twice so no raw edge is left. Strong and slow to fray; used on jeans and work shirts.
Look for: Two parallel rows of stitching on both sides of the seam.
- Modular
-
Built from parts that come apart: a cable, a pad, a battery, a strap. When one part fails, you replace that part and keep the rest.
Look for: Spare parts on sale from the maker, not just the whole thing.
- Standard parts
-
Batteries, blades, refills and fittings in common sizes anyone sells. A thing that takes standard parts outlives the company that made it.
Look for: AA cells, coin cells, standard razor blades, standard ink cartridges, ordinary screws.
Merkur 34C safety razor · Panasonic eneloop batteries · Casio F-91W watch
- Lifetime guarantee
-
A promise to repair or replace for faults in how it was made, for the life of the product. It usually excludes normal wear and accidents, so read what it covers.
Look for: A guarantee from the maker, not the shop, with a clear way to claim it.
- Planned obsolescence
-
Designing a thing to fail, or to stop being supported, sooner than it needs to: glued-in batteries, parts no one sells, software updates that end.
Look for: Before buying, ask whether you could open it, and whether parts exist.
- Double-edge blade
-
The thin, flat steel blade with two cutting edges used in safety razors. It is a standard size, so any brand fits any safety razor, and the blades cost pennies.
Look for: Buy a sampler pack first: blades differ in sharpness, and the right one is personal.
- Nib
-
The metal tip of a fountain pen that puts ink on paper. Steel nibs are tough and cheap; on many pens the nib can be swapped for a finer or broader one, or replaced if it is damaged.
Look for: A pen whose maker sells spare nibs, so a dropped pen is a small repair, not a new pen.
- Hot-swappable
-
A keyboard whose switches pull out of sockets instead of being soldered in, so a faulty or worn key switch can be replaced in a minute with a small puller.
Look for: “Hot-swap” sockets and a standard switch type that other makers also sell.
- Soldered parts
-
Memory, storage or a battery fixed permanently to the board instead of in a socket or with a plug. When a soldered part fails or is too small, the whole board, and often the whole device, goes with it.
Look for: Check a teardown or the maker's spec for replaceable memory, storage and battery before you buy.
Care and repair
- Seasoning
-
A thin layer of oil baked onto iron or carbon steel until it turns hard and dark. It stops rust and makes the pan more non-stick the more you cook in it.
Look for: Cook with fat, wipe dry, and rub on a drop of oil after washing.
- Honing and sharpening
-
Honing straightens a dull edge that has rolled over; sharpening removes steel to make a new edge. Hone often, sharpen a few times a year.
Look for: A steel or ceramic rod for honing, a whetstone for sharpening.
- Re-proofing
-
Putting back a waterproof finish that has worn off: wax on waxed cotton, wash-in or spray-on proofer on rain jackets.
Look for: When rain stops beading and starts soaking in, it is time.
- Darning
-
Weaving new thread across a hole so it becomes fabric again. Works on socks, jumpers and elbows, and can be invisible or a bright patch you are proud of.
Look for: A darning needle, wool in a matching weight, and something round to stretch the hole over.
- Resoling
-
Replacing a worn sole and heel on good shoes or boots. A cobbler can do it for a fraction of the price of new ones, if the shoe is welted or stitched.
Look for: Get it done before the wear reaches the welt or the midsole.
- Gasket
-
A soft ring, usually rubber or silicone, that seals a joint: the base of a moka pot, the lid of a flask or a jar. Gaskets harden and crack with heat and age long before the metal or glass wears out.
Look for: A maker that sells gaskets as spares. Replacing one is usually a minute's work.
- Feeding leather
-
Rubbing in a conditioner or wax so leather stays supple and does not crack. Twice a year is plenty for most boots, wallets and bags.
Look for: Clean off dirt first; leather dries out faster when it is dirty.
Know the words, then use them: six questions before you buy, and simple repairs for when something wears.